UK/AU/NZ Electric Vehicle Charging · Load hubUK / EU / AU only
Which Power Stations Can Run a MG4 EV / MG ZS (7kW Single-Phase Mode)?
All 35 portable power stations, home batteries and hybrid inverters sold in UK / EU / AU, ranked by compatibility and runtime for the MG4 EV / MG ZS (7kW Single-Phase Mode).
Electrical profile
- Running power
- 7,360 W
- Starting surge
- 7,360 W (1.0×)
- UK/EU/AU voltage
- 230 V
- UK/EU/AU connection
- Type 2 IEC 62196 / Commando
- IEC MCB
- 32 A
- Market
- UK / EU / AU only
Sizing summary
The MG4 EV / MG ZS (7kW Single-Phase Mode) draws 7,360 W while running and 7,360 W at start-up — a surge ratio of 1.0×, meaning it behaves as a steady resistive or electronic load. It is sold in UK / EU / AU only and runs on a 230 V single-phase circuit, so any 230 V unit with enough wattage qualifies.
7 of 35 sources available in UK / EU / AU pass every check. The leanest fully compatible choice is the Sungrow SH10RS Hybrid Inverter + Battery , while the EG4 18kPV Hybrid Inverter + PowerPro 14.3kWh WallMount delivers the longest runtime (1.7 hrs at 100% duty) .
As a 230 V single-phase charging profile, this 7,360 W load draws 32.0 A and needs a dedicated 32 A circuit with Type A or Type B RCD protection under BS 7671 Section 722 (AS/NZS 3000 Section 7 in Australia and New Zealand).
Every power source ranked for the MG4 EV / MG ZS (7kW Single-Phase Mode)
| Power source | Capacity / output | UK/EU/AU verdict | Load | Runtime @ 100% | |
|---|---|---|---|---|---|
| EG4 18kPV Hybrid Inverter + PowerPro 14.3kWh WallMount | 14,336 Wh / 12,000 W | Verified Compatible | 61% | 1.7 hrs | Full report → |
| Tesla Powerwall 3 | 13,500 Wh / 11,500 W | Verified Compatible | 64% | 1.6 hrs | Full report → |
| Sungrow SH10RS Hybrid Inverter + Battery | 9,600 Wh / 10,000 W | Verified Compatible | 74% | 1.1 hrs | Full report → |
| Selectronic SP Pro AU Off-Grid Inverter | 10,240 Wh / 7,500 W | Compatible · High Load | 98% | 1.2 hrs | Full report → |
| Enphase IQ Battery 5P (Dual 10kWh Bank) | 10,000 Wh / 7,680 W | Compatible · High Load | 96% | 1.2 hrs | Full report → |
| Bluetti EP800 + 2x B500 Home System | 9,920 Wh / 7,600 W | Compatible · High Load | 97% | 1.1 hrs | Full report → |
| Sigenergy SigenStor 5-in-1 System | 8,000 Wh / 8,000 W | Compatible · High Load | 92% | 55 min | Full report → |
| EG4 6000XP Off-Grid Inverter + 10.2kWh Server Rack | 10,240 Wh / 6,000 W | Continuous Overload | 123% | — | Full report → |
| Victron MultiPlus-II 48/5000 + 10kWh LiFePO4 Bank | 10,240 Wh / 4,000 W | Continuous Overload | 184% | — | Full report → |
| Zendure SuperBase V6400 | 6,438 Wh / 3,800 W | Continuous Overload | 194% | — | Full report → |
| EcoFlow Delta Pro Ultra (1 Inverter + 1 Battery) | 6,144 Wh / 7,200 W | Continuous Overload | 102% | — | Full report → |
| Fox ESS EP5 Modular Hybrid | 5,180 Wh / 5,000 W | Continuous Overload | 147% | — | Full report → |
| Oukitel BP5000 Pro Max | 5,120 Wh / 5,000 W | Continuous Overload | 147% | — | Full report → |
| myenergi Libbi (5kW Inverter + 5kWh Battery) | 5,120 Wh / 5,000 W | Continuous Overload | 147% | — | Full report → |
| Jackery Explorer 5000 Plus | 5,040 Wh / 7,200 W | Continuous Overload | 102% | — | Full report → |
| EcoFlow Delta Pro 3 | 4,096 Wh / 4,000 W | Continuous Overload | 184% | — | Full report → |
| Goal Zero Yeti PRO 4000 | 3,993 Wh / 3,600 W | Continuous Overload | 204% | — | Full report → |
| Anker SOLIX F3800 | 3,840 Wh / 6,000 W | Continuous Overload | 123% | — | Full report → |
| Anker SOLIX F3800 Plus | 3,840 Wh / 6,000 W | Continuous Overload | 123% | — | Full report → |
| Fossibot F3600 Pro | 3,840 Wh / 3,600 W | Continuous Overload | 204% | — | Full report → |
| EcoFlow Delta Pro (Gen 1) | 3,600 Wh / 3,600 W | Continuous Overload | 204% | — | Full report → |
| Mango Power E (3.5kWh LFP) | 3,530 Wh / 3,000 W | Continuous Overload | 245% | — | Full report → |
| Bluetti AC500 + B300S | 3,072 Wh / 5,000 W | Continuous Overload | 147% | — | Full report → |
| Pecron E3600LFP | 3,072 Wh / 3,600 W | Continuous Overload | 204% | — | Full report → |
| Jackery Explorer 3000 Pro | 3,024 Wh / 3,000 W | Continuous Overload | 245% | — | Full report → |
| Bluetti AC300 + B300K | 2,764 Wh / 3,000 W | Continuous Overload | 245% | — | Full report → |
| Anker SOLIX F2600 | 2,560 Wh / 2,400 W | Continuous Overload | 307% | — | Full report → |
| EcoFlow Delta 2 Max | 2,048 Wh / 2,400 W | Continuous Overload | 307% | — | Full report → |
| Anker SOLIX F2000 (PowerHouse 767) | 2,048 Wh / 2,400 W | Continuous Overload | 307% | — | Full report → |
| Bluetti AC200L | 2,048 Wh / 2,400 W | Continuous Overload | 307% | — | Full report → |
| Jackery Explorer 2000 Plus | 2,042 Wh / 3,000 W | Continuous Overload | 245% | — | Full report → |
| Bluetti AC240 (IP65 Weatherproof) | 1,536 Wh / 2,400 W | Continuous Overload | 307% | — | Full report → |
| Jackery Explorer 1000 v2 | 1,070 Wh / 1,500 W | Continuous Overload | 491% | — | Full report → |
| Anker SOLIX C1000 | 1,056 Wh / 1,800 W | Continuous Overload | 409% | — | Full report → |
| EcoFlow Delta 3 Plus | 1,024 Wh / 1,800 W | Continuous Overload | 409% | — | Full report → |
Frequently asked questions
What size power station do I need for a MG4 EV / MG ZS (7kW Single-Phase Mode)?
You need at least 7,360 W of continuous inverter output, 7,360 W of surge capacity. 7 of the 35 power sources we track in UK / EU / AU meet all three requirements; the leanest is the Sungrow SH10RS Hybrid Inverter + Battery.
Which power station runs a MG4 EV / MG ZS (7kW Single-Phase Mode) the longest?
The EG4 18kPV Hybrid Inverter + PowerPro 14.3kWh WallMount offers the longest runtime among compatible units: about 1.7 hrs at a 100% duty cycle thanks to its 14,336 Wh battery.
What breaker does a MG4 EV / MG ZS (7kW Single-Phase Mode) need?
At 230 V the load draws 32.0 A, so it needs a 32 A MCB with RCD protection on a dedicated circuit, sized under BS 7671 / IEC 60364 (Ib ≤ In ≤ Iz).